Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels under hood and tire pressures. Preform basic safety inspection.
Gerrald T. gave our service a 5 star review on 12/4/2019
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels under hood and tire pressures. Preform basic safety inspection.
Replace front rotors, lubricate all parts necessary, and road test vehicle.
Road test vehicle. Check all suspension and steering parts for wear. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
Rotate 4 Tires (No Balance)
SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels under hood and tire pressures. Preform basic safety inspection.
CABIN AIR FILTER – Remove and Replace – All Applicable Models
Replace front pads and rotors, lubricate all parts necessary, and road test vehicle.
Replace rear pads
AUTOMATIC TRANSMISSION FLUID – Drain and Refill – All Applicable Models
DIFFERENTIAL FLUID – Drain and Refill – AWD
Gordon P. gave our service a 5 star review on 8/16/2019
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Lube, oil, and filter
Katie S. gave our service a 5 star review on 3/1/2019